Before Cleaning: Test a hidden section for colorfastness. Remove excess mud, dirt, food, etc., and blot up wet spills. Vacuum loose, dried debris before cleaning. Cleaning Care Instructions: Intended for use on washable fabrics and fabrics approved by manufacturer for water-based cleaning or protection products. These fabrics are generally marked W or WS, but check manufacturer's cleaning care and warranty information. Do not use on S coded fabrics, silk, wool, velvet, leather, imitation suede or dry clean only fabrics. 1. Protect surrounding area from overspray. If overspray occurs, quickly wipe up. 2. Shake can well. Hold 4 inches to 6 inches from fabric or carpet. Spray an even coating of foam on fabric. Wait 3 to 5 minutes. 3. Blot or lightly rub area with a clean, damp cloth or colorfast sponge. Rinse cloth and repeat until clean. Stubborn stains may require additional treatments. Do not saturate fabric. Hint: To avoid rings, clean an entire section of fabric at a time. 4. When dry, wipe clean with dry colorfast cloth or vacuum thoroughly. 5. Scotchgard Protector begins working immediately to protect against future stains and re-soiling. Note: Certain stains may cause permanent discoloration even after cleaning. Do not mix with bleach or other household products. Storage: Store at temperatures below 120 degrees F (49 degrees C).