To Open: Screw on nozzle clockwise to pierce metal seal. Remove cap counter-clockwise, holding nozzle base. Directions: Protect work area from spills. Surfaces should be clean, dry and close fitting. To Use: 1. Apply sparingly to one surface. 2. Press parts together and hold for 15-30 seconds. For best results, leave bonded items undisturbed for at least 10 minutes. Full cure in 24 hours. Note: Not suitable for polystyrene foam, foam rubber, polyethylene and polypropylene. Bonded items should not be placed in oven, microwave or dishwasher. Fingers bonded? Apply cooking oil to bonded area of skin. Gently massage bonded fingers back and forth to peel bond apart. Use rolling, peeling motion - do not pull.